Digi Cabi Green LED does not lit up

[simanta saikia]

Bought a Digi Cab AD080 online. I have been useing it since 23/08/11. Everything was working fine but to day (27/08/11) the Green LED does not lit up. But thank God the machine seems to be still functioning because the Hygrometer is showing the right RH %. What to do now?

[Red Dot Photo]

Did you try to rotate the knob?

If the hygrometer is showing the right RH%, it is fine.

You can also ring us at 67474317 if you have further queries.

[simanta saikia]

Thank you very much for your reply. Yes, I tried to rotate the knob. It was in the extreme end of the blue zone and at that point of time the meter was displaying 40% RH. So, I wanted to increase it a bit and rotated it anti-clockwise towards the top end of the yellow zone and it was then when it turned off. Now, no matter in whichever direction I rotate it the Green LED remains unlit and futher more the RH% reading does not go beyond 54%. I think there is a malfunction with the machine. There are no service outlets in this region however the online site from where I purchased it says it has 1 Year Manufacturer Warranty. I will have to contact them.

[toffee bread]

Basically clockwise will make it 'dryer'. I'm not sure if warranty covers LED light default. Do contact your dealer.

[petercan]

Just called up Digihub, was told the green light won't be off as to maintain
the RH value that has been set.

BTW, anybody manage to place the tray on the 1st layer?
Mine seem to be block by the circuit inside.
Only able to place the tray on the 2and layer.