Forum: Nissin Product Support

Which Nissin flashes as remote supports FP Sync - Nissin Di866 Mark 2 (Nikon) or Nissin Di622 Mark 2 (Nikon) or other models ?

recently i just bought a new 622 Mark 2. i noticed that when i turn in on , the loading time take forever. the pilot red LED never turn Green, occasionally it does and its random. i tried turning on and off and kept trying for a week already but still it wont work. Theres nothing wrong with the batteries, cos they are brand new, i am not sure what is the cause of the problem. I've owned a few flashed previously, but this is my first time encountering this. i know normally we have to...

The differences between Nissin Di866 and Di866 Mark II include: Mount: Mark I has a plastic mount while mark II has a metal mount. Sound of zooming: Mark II zooming of the flash head is softer than the Mark I. Sub-flash power. Mark II sub-flash power is able to go to 1/32 while the Mark I's can go to 1/16.

Canon 500D be used wirelessly with the Nissin Di466 with the Nissin Di466 in digital slave mode. Hence line of sight is needed and the pop-up flash of the Canon 500D has to be activated. One can dial down the flash intensity of the pop-up flash to say -2EV if the direct flash from the pop-up flash is not intended. Note that the Nissin Di466 for Canon is current's not compatible with radio flash triggers such as Phottix Strato and Pocket Wizard.

Nissin digital has released information that Nissin speedlight across all models (Nissin Di466, Di622, Di622 Mark 2, Di866, Di866 Mark II) are not compatible with high voltage 1.6V Nickel Zinc (NiZn) batteries.

Currently, Nikon D5100 is not compatible with Nissin Di622 Mark 1.

Can nissin di866 canon use any flash trigger and can it master with di622??

A follow up on the YouTube channel regarding the above issue.: how long the battery will last,? and how many exposures for one time charge of batteries.. i my self have Di866 and im using GP 270mh batteries.. but they cant even hold 15 shots please reply to my quections . thanks -- http://www.youtube.com/watch?v=HKT7ANgTcQo For regular NiMH batteries which 'hold charge' such as Sanyo Eneloop, GP Recyckos, Powerex Imedions, it should last ~100 full power bursts. For regular...

Anyone using 60D? I cant get the Di866 to fire on its own. My in-built flash will fire together even when my camera settings are set to fire only external flash. Anyone using 60D has the same problem as well?

hi, i would like to seek for some pro expertise on Nissin Di622. my problem is my Di622 green pilot light do not turn, initially i thought it was battery issue but the problem cannot be resolved after i tried new battery also. i really wondering what happen to the flash, can someone advice me?

http://blog.reddotphoto.com.sg/wp-content/uploads/2010/03/466_oly-02.jpg Nissin Di466 for micro 4/3s is compatible with Panasonic GF2. Black and white versions are available!

As a query above, the Nissin Di622 Mark II and Di866 is compatibile with Canon 60D.

Hi, newbie here. Where can we get colour gel for Nissin di622? Also how do we attach it?

Nissin New model "Di622 MARK II" won the Gold Medal of "Digital Camera Grand prix 2011" and Di866 professional also gained the Silver medal of the prize. Digital Camera Grand Prix is sponsored by Digital Camera Grand Prix authority of Japan. http://www.nissin-japan.com/images/2010/11/08/dgpgold_2.jpghttp://www.nissindigital.com/images/2010/11/08/622mkii_f_forweb_rgb_2.jpg ...

Test (Using Canon system) Di866 on camera, in Wireless mode, Master, Channel 1, Group A, TTL M set to 'NA'' Di622 Mark II, set to wireless TTL salve mode, Channel 1, Group A by default. Di866 will trigger a flicker of flash for the IR/TTL signals to reach the slave flash etc. This 'TTL pre-flash' wlill not affect the overall exposure of the image.

With the recent launch of the Nissin Mark 2, several new features have been released. http://www.reddotphoto.com.sg/content.php/130-Nissin-Di622-Mark-2-revealed Comparisons: Flash exposure compensation Mark 1: No flash exposure compensation Mark 2: Flash exposure compensation from -1.5 to +1.5 EV in 0.5 steps PC sync chord input Mark 1: NA Mark 2: Available to connect flash triggers or from camera body with sync chord output for an extra method of triggering the flash

Only the Di866 can do high speed sync in both wired and wireless modes. Depending on the camera, the Di622 for Nikon should be able to do up to 1/250.

I've just bought 3 units of Phottix Atlas. I am now looking at the Nissin Di622 flash. Will this units work together? :confused: The Nissin Website State the Nissin is only for digital camera. And The Phottix Manual stated that the Atlas may not work with Nissin Flash. I know the Atlas flash hotshoe trigger is only for single pin. Please Advise. Thank you

Dear, I have already made up my mind to purchase NISSIN SPEEDLITE Di622 for my NIKON D3000. I would like to know, the "In built flash" of "Nikon D3000" can work as a master in the "Slave mode of NISSIN Di622"?? That means, If I will activate the "SLAVE MODE" of "NISSIN Di622" & taken a photo with "In built flash", "Nissin Di622" will automatically flash?????? Please answer...... Regards! Sumit.:eek:

Currently, only Nissin flash purchased with local warranty will be able to get free updates of the flash's firmware. Grey sets from overseas or from non-authorised retailers will not be entertained at Nissin Service Center in Singapore.

The are generally 3 ways to trigger an off-shoe flash Wireless TTL method Via Canon 60D, 7D, (or ST-E2) will be able to trigger a Nissin Di866 for Canon or a Nissin Di622 Mark 2. This method will need the pop-up flash which will transmitter an optical/IR signal. Pros: TTL, no need extra transmitter/receivers.(unless ST-E2 needed) Cons: Need line of sight, may not be reliable in strong sunlight/outdoors. Only high end flash are compatible Optical triggers Any camera with a pop-up...

hi, on sunday when i am using the di866 flash on my 50d, i can hear some sound coming out of the flash, but working okay. i took out the battery, put back again, unmount the flash and mount the flash again, the sound still persist. i cannot describe the sound, and when i shake the flash i can hear some rumbling noise. please help to advise what could be wrong with it.

The Trigger Voltage : 1. Di466N - 3.8V / Di466C - 4.8V 2. Di622N - 3.8V / Di622C - 5.8V 3. Di622N MARKII - 3.8V / DI622C Mark II - 3.3V 4. Di866N - 3.8V / Di866 - 3.4V This is the official range of trigger voltage of the Nissin flashes.

Hi, is the Nissin 866 compatible with the Canon 400D ? sorry if this has been answered before I search in forum but has yet to find anything on this matter. Cheers, bblurrr

The above is not compatible. The Nissin Di866 for Canon is compatible with the Canon 5D2 though Compatibility chart found here

So far, only the Di466 for four-thirds (4/3s) can be triggered using radio triggers such as the YongNuo RF602 and various Phottix triggers. The Nissin Di466 for Canon and Nikon has yet to have the firmware upgraded and hence those units won't be able to trigger with radio triggers at the moment.